Model: CV 12/24-2PV

12 V Solar Panel to 24 V Lead Acid Battery Charger

Application

Used to charge a 24 V battery @ 2 amps max from a 12 V, 10-60 Watt nominal Solar Panel.

Other battery chemistries, for example Li-Ion, may be charged and odd voltage panels, for example thin film, may be accommodated by factory adjustment. Contact the factory for other battery charge voltages and panel sources.

Model: CV 12/24-2PV


Product similar to Photo

Features

  • Low Cost
  • High Performance
  • Nominal Maximum Power Point Tracking
  • Input Power Limited to Prevent Over-loading
  • Rugged boost voltage design
  • Available in Optional NEMA 4 enclosure (weatherproof)
  • Very High Efficiency >95 % typical

Electrical Specifications

Input Voltage (V) 0 - 24 V (12 V nominal Solar Panel)
Output Voltage (V) +/- 2%
 28
Output Current (Amps) 2
Current Limited * 2.5
Input Fuse 6 amp polyswitch resetable fuse
Quiescent Current from Solar Panel 15 mA
Quiescent Current from Battery <36 micro-A
Efficiency 92 - 96 % depending on loading and state of charge

* Note: limited by input power characteristics

Fusing

This unit requires an output fuse rated at 32 V DC, 3 - 5 Amps DC rating. The unit has an internal output diode.

Temperature Range

  • -40 deg C to 65 deg C
  • It is recommended, as with all electronics, that the unit not be placed in direct sunshine

Mechanical Specifications

Enclosure:

  • Small Plastic Enclosure
Dimensions:
  • 3" X 2" X 1.5" nominal
Weight:
  • approx 0.4 lbs.
Terminations:
  • 6" Flying Leads
  • Power #16 AWG
  • White: Battery +
  • Black and Blue: Battery - and Solar Panel -
  • Red: Solar Panel +
  • Humidity:
  • 0 - 90 % non-condensing

Mechanical Drawing: Click here for picture

Order Model No:

CV 12/24-2PV

Note: In the interest of continuous product improvement, specifications subject to change without notice.